Manufacturer of Labels and Stickers

They can represent Name of the Organization, Individuals name , Designation etc. Normally used on ties or shirts.

Varieties:

• Clip type
• Pin type
• Magnetic type

These labels are used for control panels, Electrical panels, etc.
These can be of Label or Metal.
These are normally similar in design and mandatory in most cases.

• Key chains can be of Metal, Rubber, Leather. 
• Any Design, Size and Shape.
• Rubber Keychains are Soft and light weight.

Rubber labels are normally used in Fabrics, Garments, Bags, Shoes, Slippers, and Coats etc for branding.

FEATURES:

• Long life.
• Washable.
• Stitchable.
• Appealing and Stands out.

These labels are made for branding of Shirts, Trousers,Bags, Jackets, Coats, etc.
These labels are stitchable. We have wide range of finish in these labels

• Fabric Printed labels
• Woven Labels

Tags can be offered in. Tags will come with self locking tags.

• Plastic
• Paper boards
• Leather

Bag label is majorly used for branding of
Bags, Ladies Purse, Executive Bags, Laptop Bags, School bags, etc.
Labels can be made as per specification and brand image.
Labels can be mounted on the desired area by stitching or Locks.
Labels can be of Aluminum, Brass, Rubber, etc.

LABEL FINISH: Matt, Gloss, Semi Matt, Semi Gloss to match the surface of the product.

LABEL SIZE: Any size.

LABEL THICKNESS: Any thickness. If there is a depth or slot existing can be matched.

ADHESIVE QUALITY: Adhesives from world’s best brands are available. Adhesives can be made based on 1.Surface where the label is getting stuck 2.Temperature and weather conditions at which the product is kept.

MATERIAL USED: We use base materials from self certified suppliers across the globe. World’s best brands are available. Technical data report can be provided on requirement.

LABEL VARITIES: 1. VENYL LABELS, OPAQUE OR TRANSPERENT.

2. FRONT PANEL LABELS

3. LOGO LABELS.

4. REMOVABLE LABELS

5. REFLECTIVE LABELS

6. RADIUM LABELS

7. FIRE RESISTENT LABELS.

8. EXTREME WHEATHER LABELS.
9. HOLOGRAM LABELS.

10. National Safety Signs.

LABEL FINISH: Matt, Gloss, Semi Matt, Semi Gloss to match the surface of the product.
LABEL SIZE: Any size.
LABEL THICKNESS: Any thickness. If there is a depth or slot existing can be matched.
ADHESIVE QUALITY: Adhesives from world’s best brands are available. Adhesives can be given based on:

1.Surface where the label is getting stuck
2.Temperater and weather conditions at which the product is kept.

MATERIAL USED: We use base materials from self certified suppliers across the globe. World’s best brands are available. Technical data report can be provided on requirement.

LABEL VARITIES:

• VENYL LABELS, OPAQUE OR TRANSPERENT.
• POLYCARBONATE OR POLYESTER LABELS.
• TAMPER PROOF LABELS.
• TAMPER EVIDENT LABELS.
• SERIAL NO LABELS.
• TRANSFER LABELS
• DOME LABELS.
• REFLECTIVE LABELS
• RADIUM LABELS
• FIRE RESISTENT LABELS.
• LABELS FOR EXTREME WHEATHER CONDITIONS.
• HOLOGRAM LABELS.

MAGNETIC LABELS: Widely used as Fridge magnets.

• STICKER TYPE
• PLASTIC TYPE
• METAL  TYPE
• RUBBER TYPE.

Membrane labels are also called as Key pad labels.
These labels come with built-in switches along with the tail to connect it to the circuit inside the machine to make it function.  Aesthetically and functionally it is a  better option when compared to conventional switch buttons. These labels can also have LED lights.
Application: Front panel labels with feather touch buttons, Electronic products, Medical equipments, etc.

These are available in 2 types PU & EPOXY.

P.U:  It has got long life i.e., above 10 years.  Can be used indoor or outdoors, scratch resistant.  Flexible wide range of colors and shapes can be offered. The label looks exclusive because of its embossed effect.

EPOXY: Looks similar to PU labels. Life expected about 3years. Can only be used for indoor products. Economical compared to PU.

Dome labels can be of Self Adhesive sticker type or Fabric type which can be stitched on the desired fabric. Fabric type can be used on products such as Bags, Shoes, and Slippers etc.                     

TAMPER PROOF LABELS:
These labels are normally used for Warranty void purpose.
It’s a water proof label, won’t peel of in wet condition or cold condition. It normally serves as a seal on a joint. It serves as seal on a joint, If anyone try to open the product the seal will break. It can be used where it is not possible to remove the sticker after labeling.
Tamper proof labels with serial numbers or continuous numbers are also available.
Application: Electronic products, Serial no labels, etc.

VOID TAMPER PROOF LABELS:
These labels are similar to tamper proof labels. The difference is when anybody tries to remove it it leaves the mark VOID on the surface where it is stuck.
There by leaving the evidence of tampering the label.

• Matter is engraved on the Metal surface.
• Metal can be Aluminum, Steel, Brass, Plastic etc.
• Variable characters are possible.

Tattoo Labels are widely used on human skin.

These labels are non allergetic.

Widely used for promotional activities especially for kids.

Our product range includes a wide range of car mats, bar mat, bar mats and table mats.

Letter Transfer:
 Used where only letters are required and it is difficult to transfer the letters.  There will be an outer lamination provided to the label for lifting the label and pasting it on the desired surface.
The letters has to be of reasonable thickness, so that it has good adhesive base to stick.
Application: Cars, Two wheelers, Branding  etc.

Water Transfers:
Labels are very thin. One cannot feel the labels after pasting.  Labels can be transferred to the desired surface.
Application: Helmet, Automobiles etc.

Types:

• Acrylic

• Brass

• Wooden

ALLUMINIUM  METAL NAME PLATES:

 Aluminum name plates can be of any thickness.  It can be mounted by using adhesives or riveting.

Name plates can be given with or without adhesive as required. 

 

Aluminum is available in any colors including Mirror, Steel and Gold finish.  Manual removing is difficult if strong adhesive is applied.

 

 Anodized Aluminum plates have extraordinary   life of 25 to 30 years.  Ideal for outdoors.

 

All these metals can be given with Printing, Etching, Engraving, Laser etching.

 

There will be a water proof coating on the Metal name plates which will give a gloss finish and protect it from Finger impressions, Oil, Water, etc.

 

TAMPER PROOF LABELS WITH SL NOS.:
These labels are normally used for Warranty void purpose.
It’s a water proof label, won’t peel of in wet condition or cold condition.  It normally serves as a seal on a joint. It serves as seal on a joint, If anyone try to open the product the seal will break.  It can be used where it is not possible to remove the sticker after labeling.
Tamper proof labels with serial numbers or continuous numbers are also available.
Application: Electronic products, Serial no labels, etc.

VOID TAMPER PROOF  LABELS:
These labels are similar to tamper proof labels. The difference is when anybody tries to remove it it leaves the mark VOID on the surface where it is stuck.
There by leaving the evidence of tampering the label. Void labels can also come with serial numbers on it.

SELF LAMINATION LABELS:      
It can be self laminated after writing on it. There by it will protect the words what is written on it. Overwriting is not possible after lamination.
Application:  Serial no labels and Quality approval labels where manual writing on the labels is required.

METAL LABELS WITH SL NO.:
Aluminum metal labels can also have sl nos etched on it.

METAL NAME PLATES:
These are available in, Aluminum, Brass, Steel, and MS.  Any thickness can be offered.  It can be mounted by using adhesives or riveting.
Name plates can be given with or without adhesive as required. 

BRASS PLATES:
Brass name plates can be with Etching, Engraving or Printing.  Water proof coat is applied on the outer surface for protecting the finish.

Steel plates:
Steel plates can be with Etching, Engraving or Printing. Water proof coat can be applied on the outer surface for protecting the finish.

Varieties:

• Key chain.
• Mobile stand.
• Pendsants

USED FOR VARIOUS APLICATIONS LIKE INSTRUCTION BOARDS, ADVERTISING BOARDS, INFORMATIVE BOARDS etc.

Varieties:

• SOFT BOARDS.
• ACRYLIC BOARDS.
• SUNPACK BOARDS.
• METAL BOARDS.

These labels are  made for branding of  Trousers, Bags, Jackets, Coats, etc.
These labels are stitchable. 

• Leather Printed Labels
• Leather Embosed Labels